Showing posts with label Colorbox. Show all posts
Showing posts with label Colorbox. Show all posts

Friday, February 20, 2009

Happily Happy!

Now just look what you can do with a cricut! All those diecuts I cut yesterday.....all are in white paper except for 2 castles....I just inked them up. This time, I used Colorbox Queues. Love them! Then I layered them altogether:



And I decided this one doesn't need a single thing except the words that were on the paper.....Happily Ever After.....

Yep...think about it! If I were a little girl in a huge castle with all that glitter.....and trees and flowers and a crown on my head and swirls in the sky and I lived on a hill.......

What could I possibly add to this one???

LOL!

I've made this for Elaine who lives in mom's retirement center....I hope it will make her happy! I used the Dress Up cartridge for everything except the swirls and they are from the Home Accents Solution cartridge.

Who knew diecuts could be this much fun???

Tuesday, January 27, 2009

Make your own stencil - cuttlebug 2 part folders

I'm going to try something a little different tonight. I did the video with a different angle and got some clear close-ups of what Torrey and I did with cuttlebut embossing folders to give them their own design. So I'm going to publish this blog with just the video and no photos.

Let me know if you'd prefer me to continue to add the close-up photos!




Youtube link

This is the final in our series "Make your own stencil" - hope you have enjoyed it!

Saturday, September 27, 2008

Pulling the other way

I honestly think that when you do something, you need to turn right around and do it 2 or 3 times again so that you will imbed the process in your brain! So, last night, I made another pull card. Of course, with me, I get terribly bored if I do the same thing over and over, so for this one, I decided to figure out the mechanics of how to make it pull up and down instead of side to side....and how to add diecut cutouts to the front for a window.

OK - it may have been way too late for that kind of calculations! But I think it turned out great! I used Spellbinders butterfly die and the new 12" border die.



For the border flourish, I diecut, embossed, then used the airbrush to add color while the paper was still in the die - using the stenciling side to get this effect. Then I added a layer of stickles and a layer of glossy accents - so there is a lot of dimension to this piece that the camera does not pick up.

The window is cut out and behind it, the sentiment was printed on vellum (print first, then cut) and attached to the background. Yes, you cut the butterfly out of all 3 layers of cardstock, then line them up to form the aperture.

When you start to pull it open, you can see that the background butterfly with the sentiments is going away and the border is continued on each background piece:



Here it is fully opened.



I used some stencils and a glitter pen, then went over that with glossy accents for a faint background swirl.



For the center, the hidden background now shows and it matches the coloring of the swirls down the side.



And the bottom matches the top card:



I wanted you to get a feel for the dimension on this piece. Several layers. But oh! What fun!!!



"Like the wings of a butterfly, always reach for the sky!"

Only a great teacher like Susan could inspire me to push myself to turn her technique for a pull out card into something this much fun!!! Thanks Susan!!!

Tuesday, May 20, 2008

SBYL! Technique classes # 2

Where do you stop when you teach techniques? Is it just the background? Or the whole thing? Regardless of where I decide to stop, I'm sure having fun doing samples this week!

I'll call this one "Direct to Wrinkles" LOL! Maybe I should just use my face? I started with white cardstock on black.



Wrinkle up the paper, apply ink direct to the "mountains", spritz and dry. I used distress ink and Ancient Page. Can you tell which is which?



This is Ancient Page by Colorbox. Guess I will also teach basic stamping and diecutting. One of my all time fav diecuts is this flower from the Flower Creations 2 die by Spellbinders.



And here's why I like it....truly 3D...the center petals pop up. I used the same technique to color the white diecut as well.



And is this beyond adorable? When I looked at this distress ink background, I saw teddy bears. So I diecut one of Spellbinders, covered it in glue, dropped on some flock fur, dusted it off and painted on the face, arms and paws with a marker.



I just can't stop with one technique per card....so I think these classes are going to be hopping!

Still don't have a name for this series of ATC sized technique cards. I'm making up labels to print out and put on the back of each card, reminding you what the techniques are and what products are used.

I'm thinking we'll fill up one or more of the 7Gypsies ATC spinners with these. Should be a great way to display them on your workstation!

Again, I'm just posting teasers here, not tutorials! Ornery thing, aren't I?

Tuesday, March 25, 2008

Stenciling vs Reverse Stenciling

I thought I would use the cali-lilly die to showcase the difference between stenciling and reverse stenciling. You might want to go back to yesterday's blog for a little refresher.

So, on the cut side of the die, I used my Fluid Chalks and applied ink directly to the die. I sort of made the flowers purple, the stems green and then just added different colors wherever. This is an edgeability die, so the sandwich is just a little different because you have the back side of the card that you do not want to cut or emboss (or ink!)



Place the inked die, ink side down on the FRONT side of an open card. Note that I have started to bend the back of the card up here.



Place the thin white spacer plate on top of the die



Then fold the back of the card up over the top of the thin white spacer plate



You will place this "package" on top of the white cut mat, cut side up.



Place your emboss mat on top of this, emboss side down and run it through the Wizard.

When you remove the cut mat and the emboss mat, you will have a cut line that looks like this.



For the emboss sandwich, you want to place that cut line that you just saw against the tan embossing mat. AFTER you remove the thin white spacer plate.

I know, it's a little confusing, but hang in there...once you've done a hundred of these...it's a piece of cake! LOL!

OK, the emboss sandwich will be (from the bottom to the top)

White cut mat, cut side up
tan polymer pad
paper that has been cut, still in the die
die, cut side down
fold the back of the card to be on top of this
White emboss mat, emboss side down

And run it back through the Wizard



When you take the card out of the die, you will then have ink on the de-bossed areas of the card. The embossed areas will remain white like the original card. Sort of cool, huh?



As you can see, the die is a bit shorter than the card, so next, just trim off the top and bottom, if you want.



That is "reverse stenciling" or "direct-to-die inking" that I talked about yesterday. The embossed areas are not inked.

With this die, you also get 2 separate flowers. I diecut and embossed these, then while the paper is still in the die, flip it over and add fluid chalk to the openings in the die.



This inks the embossed areas of the die....and the debossed areas stay white



Whe you lay the embossed-inked stems next to the debossed-inked card...you can see the difference:



And then I added sentiments from MSE. I just thought this would make a great sympathy card....and I happen to need one to send out this week.



When you open the card...you get the sentiment from the window and the 2 little stems.



And my little bonus secret....take those stems, cut and emboss them 3 times in paper type Art Clay Silver, fire them layered as a bouquet and it makes a gorgeous little pen!!!



So many ways to play with this die....so little time!!! Sort of the story of my life!!!

Monday, March 24, 2008

Layering dies, stepping it up!

OK, are you ready? Stepping up yesterday's blog. And I'm using the library pocket die. I actually love this die and use it quite a bit.



I've layered the little butterfly from Flying Fantasies on top of it. Remember, both cut sides are up.



There is always a chance that a die will move, so just put a piece a tape across it. Don't worry, the die will cut right through the tape.



The pocket will cut and the butterfly will cut out.



Just pull the tape off and pick up the butterfly



Fold your pocket:



Ink the edges and then adhere the little cut out butterfly to the corner of the tag.



Very dimensional:



Sort of a recap of yesterday, but now to step it up. I'm going to use Colorbox Fluid Chalks:



Apply the fluid chalk directly to the cut side of the die. In random patterns. Know that the colors that are on the top are the first that will be applied to the paper when the paper touches the ink.



Ink the entire die.



Place the little die in the center. I'm using a die from the heart nestabilities for this.



When you run it through and die cut, this is what you will get. I sort of like the wide area of white around the heart.



Next, ink the inside center side tabs of the die cut:



So when you fold the pocket up, the background inside the heart is inked.



Now remember, so far, I have only die cut this. If you go ahead and emboss it, you get much more ink on the paper and a more distinct pattern around the butterfly:



Here are the 2 pocekts side by side. The butterfly was cut and embossed. The heart was only cut...not emobssed.



So, think about the possibilities of this. You could stamp any image on the die itself and then it would reverse the image onto the library pocket. Swirls would be easy and fun. You could stamp the colored ink, then stamp a black inked swirl. And it might look fun if the die moved a little and sort of smooshed the stamp.

I think any ink would work. I picked fluid chalks because they stay wet a long time. But the really cool thing is that you just let them dry on the die...they turn to chalk and you simply wipe them off with a tissue.

And what if you used watercolor paper, and then took a wet brush and blended the ink?

Fun, quick, easy....and a great way to bring an old die back to life. I think I've had this library pocket die for almost 3 years now! My...how time flies!!! This direct-to-die inking technique, also called "reverse stenciling" was inspired by my good friend Holly Craft (oh! how I wish I had "craft" as my last name!!!) and she was inspired by her fellow Spellbinders design team member Michelle Klomp, who brayered ink directly onto the die. Just something else for you to give a try!

Tuesday, February 5, 2008

Judi on Judy

Yep, Judi Hodgkin's Scrapperdashey paper on a Judy Stonehouse wood purse!!!



Judi has been here this week from London and we have just been having such a good time playing with her papers....making samples for CHA. This one is going to go to the Colorbox (Clearsnap) booth.



The handle was made with beads and vintage bobbins. I left the thread on, sealed it with Judi*kins Diamond Glaze, and then distressed it with Colorbox Fluid Chalk Queues. Let me tell you, they work great on metal and plastic!



I've used B-Line Designs Ruber stamps....all done with Colorbox Queues. But some of this is Judi's paper, cut out and inked. And I've used a few Oxford Impressions stamps as well.



You can see a close up of an inked bobbin here. For the little wood spools, I cut out strips of stamped paper, inked them, and wrapped them around the spools. And those are new white buttons that I inked with the Colorbox Queues. Great way to get all the colors to coordinate!



You can create a shadow by sketching an outline around the cut out stamped image, and then inking it totally dark. I did this on the dressform and the scissors.



I even inked the snaps.



A view of the back:



And a side view:



Judi on Judy.....a great way to play! And since I happen to love vintage sewing stuff, this paper, these stamps and all this ink...just came together to make this cute little sewing box. If you are attending CHA....check it out at the Clearsnap booth!